For most of us Linux itself is a mystery. Audio in linux is a even more mysterious. When I started using linux it didn’t play my mp3 collections and asked for codec download and other things which I had no idea about. Later when I started reading more about Linux I came to know lot about it. One thing which confuses most people is audion in linux. There are lot of term like Gstreamer, ALSA, Pulse Audio which I don’t know what it’s. So here is an which explains these things .
Linux’s audio architecture is more like the layers of the Earth’s crust , with lower levels occasionally erupting on to the surface, causing confusion and distress, and upper layers moving to displace the underlying technology that was originally hidden.
When most distributions stick PulseAudio and GStreamer on top, you end up with a melting pot of instability with as much potential for destruction as the San Andreas fault.
Inputs: PulseAudio, Jack, GStreamer, Xine, SDL, ESD
Outputs: Hardware, OSS
When it comes to modern Linux audio, the beginning is the Advanced Linux Sound Architecture, or ALSA.
This connects to the Linux kernel and provides audio functionality to the rest of the system. But it’s also far more ambitious than a normal kernel driver; it can mix, provide compatibility with other layers, create an API for programmers and work at such a low and stable latency that it can compete with the ASIO and CoreAudio equivalents on the Windows and OS X platforms.
ALSA was designed to replace OSS. However, OSS isn’t really dead, thanks to a compatibility layer in ALSA designed to enable older, OSS-only applications to run. It’s easiest to think of ALSA as the device driver layer of the Linux sound system.
Your audio hardware needs a corresponding kernel module, prefixed with snd_, and this needs to be loaded and running for anything to happen. This is why you need an ALSA kernel driver for any sound to be heard on your system, and why your laptop was mute for so long before someone thought of creating a driver for it.
Fortunately, most distros will configure your devices and modules automatically. ALSA is responsible for translating your audio hardware’s capabilities into a software API that the rest of your system uses to manipulate sound. It was designed to tackle many of the shortcomings of OSS (and most other sound drivers at the time), the most notable of which was that only one application could access the hardware at a time.
This is why a software component in ALSA needs to manages audio requests and understand your hardware’s capabilities. If you want to play a game while listening to music from Amarok, for example, ALSA needs to be able to take both of these audio streams and mix them together in software, or use a hardware mixer on your soundcard to the same effect.
ALSA can also manage up to eight audio devices and sometimes access the MIDI functionality on hardware, although this depends on the specifications of your hardware’s audio driver and is becoming less important as computers get more powerful.
Where ALSA does differ from the typical kernel module/device driver is in the way it’s partly user-configurable. This is where the complexity in Linux audio starts to appear, because you can alter almost anything about your ALSA configuration by creating your own config file – from how streams of audio are mixed together and which outputs they leave your system from, to the sample rate, bit-depth and real-time effects.
ALSA’s relative transparency, efficiency and flexibility have helped to make it the standard for Linux audio, and the layer that almost every other audio framework has to go through in order to communicate with the audio hardware.
Inputs: GStreamer, Xine, ALSA
Outputs: ALSA, Jack, ESD, OSS
If you’re thinking that things are going to get easier with ALSA safely behind us, you’re sadly mistaken. ALSA covers most of the nuts and bolts of getting audio into and out of your machine, but you must navigate another layer of complexity.
This is the domain of PulseAudio – an attempt to bridge the gap between hardware and software capabilities, local and remote machines, and the contents of audio streams. It does for networked audio what ALSA does for multiple soundcards, and has become something of a standard across many Linux distros because of its flexibility.
As with ALSA, this flexibility brings complexity, but the problem is compounded by PulseAudio because it’s more user-facing. This means normal users are more likely to get tangled in its web. Most distros keep its configuration at arm’s length; with the latest release of Ubuntu, for example, you might not even notice that PulseAudio is installed.
If you click on the mixer applet to adjust your soundcard’s audio level, you get the ALSA panel, but what you’re really seeing is ALSA going to PulseAudio, then back to ALSA – a virtual device.
At first glance, PulseAudio doesn’t appear to add anything new to Linux audio, which is why it faces so much hostility. It doesn’t simplify what we have already or make audio more robust, but it does add several important features. It’s also the catch-all layer for Linux audio applications, regardless of their individual capabilities or the specification of your hardware.
If all applications used PulseAudio, things would be simple. Developers wouldn’t need to worry about the complexities of other systems, because PulseAudio brings cross-platform compatibility. But this is one of the main reasons why there are so many other audio solutions.
Unlike ALSA, PulseAudio can run on multiple operating systems, including other POSIX platforms and Microsoft Windows. This means that if you build an application to use PulseAudio rather than ALSA, porting that application to a different platform should be easy.
But there’s a symbiotic relationship between ALSA and PulseAudio because, on Linux systems, the latter needs the former to survive. PulseAudio configures itself as a virtual device connected to ALSA, like any other piece of hardware. This makes PulseAudio more like Jack, because it sits between ALSA and the desktop, piping data back and forth transparently.
It also has its own terminology. Sinks, for instance, are the final destination. These could be another machine on the network or the audio outputs on your soundcard courtesy of the virtual ALSA. The parts of PulseAudio that fill these sinks are called ‘sources’ – typically audio-generating applications on your system, audio inputs from your soundcard, or a network audio stream being sent from another PulseAudio machine.
Unlike Jack, applications aren’t directly responsible for adding and removing sources, and you get a finer degree of control over each stream. Using the PulseAudio mixer, for example, you can adjust the relative volume of every application passing through PulseAudio, regardless of whether that application features its own slider or not. This is a great way of curtailing noisy websites.
Outputs: ALSA, PulseAudio, Jack, ESD
With GStreamer, Linux audio starts to look even more confusing. This is because, like PulseAudio, GStreamer doesn’t seem to add anything new to the mix. It’s another multimedia framework and gained a reasonable following of developers in the years before PulseAudio, especially on the Gnome desktop.
It’s one of the few ways to install and use proprietary codecs easily on the Linux desktop. It’s also the audio framework of choice for GTK developers, and you can even find a version handling audio on the Palm Pre.
GStreamer slots into the audio layers above PulseAudio (which it uses for sound output on most distributions), but below the application level. GStreamer is unique because it’s not designed solely for audio – it supports several formats of streaming media, including video, through the use of plugins.
MP3 playback, for example, is normally added to your system through an additional codec download that attaches itself as a GStreamer plugin. The commercial Fluendo MP3 decoder, one of the only officially licenced codecs available for Linux, is supplied as a GStreamer plugin, as are its other proprietary codecs, including MPEG-2, H.264 and MPEG.
Inputs: PulseAudio, GStreamer, ALSA,
Outputs: OSS, FFADO, ALSA
Despite the advantages of open configurations such as PulseAudio, they all pipe audio between applications with the assumption that it will proceed directly to the outputs. Jack is the middle layer – the audio equivalent of remote procedure calls in programming, enabling audio applications to be built from a variety of components.
The best example is a virtual recording studio, where one application is responsible for grabbing the audio data and another for processing the audio with effects, before finally sending the resulting stream through a mastering processor to be readied for release. A real recording studio might use a web of cables, sometimes known as jacks, to build these connections. Jack does the same in software.
Jack is an acronym for ‘Jack Audio Connection Kit’. It’s built to be low-latency, which means there’s no undue processing performed on the audio that might impede its progress. But for Jack to be useful, an audio application has to be specifically designed to handle Jack connections. As a result, it’s not a simple replacement for the likes of ALSA and PulseAudio, and needs to be run on top of another system that will generate the sound and provide the physical inputs.
With most Jack-compatible applications, you’re free to route the audio and inputs in whichever way you please. You could take the output from VLC, for example, and pipe it directly into Audacity to record the stream as it plays back. Or you could send it through JackRack, an application that enables you to build a tower of real-time effects, including pinging delays, cavernous reverb and voluptuous vocoding.
This versatility is fantastic for digital audio workstations. Ardour uses Jack for internal and external connections, for instance, and the Jamin mastering processor can only be used as part of a chain of Jack processes. It’s the equivalent of having full control over how your studio is wired. Its implementation has been so successful on the Linux desktop that you can find Jack being put to similar use on OS X.
Outputs: Audio hardware
In the world of professional and semi-professional audio, many audio interfaces connect to their host machine using a FireWire port.
This approach has many advantages. FireWire is fast and devices can be bus powered. Many laptop and desktop machines have FireWire ports without any further modification, and the standard is stable and mostly mature. You can also take FireWire devices on the road for remote recording with a laptop and plug them back into your desktop machine when you get back to the studio.
But unlike USB, where there’s a standard for handling audio without additional drivers, FireWire audio interfaces need their own drivers. The complexities of the FireWire protocol mean these can’t easily create an ALSA interface, so they need their own layer.
Originally, this work fell to a project called FreeBOB. This took advantage of the fact that many FireWire audio devices were based on the same hardware. FFADO is the successor to FreeBOB, and opens the driver platform to many other types of FireWire audio interface.
Version 2 was released at the end of 2009, and includes support for many units from the likes of Alesis, Apogee, ART, CME, Echo, Edirol, Focusrite, M-Audio, Mackie, Phonic and Terratec. Which devices do and don’t work is rather random, so you need to check before investing in one, but many of these manufacturers have helped driver development by providing devices for the developers to use and test.
Another neat feature in FFADO is that some the DSP mixing features of the hardware have been integrated into the driver, complete with a graphical mixer for controlling the balance of the various inputs and outputs. This is different to the ALSA mixer, because it means audio streams can be controlled on the hardware with zero latency, which is exactly what you need if you’re recording a live performance.
Unlike other audio layers, FFADO will only shuffle audio between Jack and your audio hardware. There’s no back door to PulseAudio or GStreamer, unless you run those against Jack. This means you can’t use FFADO as a general audio layer for music playback or movies unless you’re prepared to mess around with installation and Jack. But it also means that the driver isn’t overwhelmed by support for various different protocols, especially because most serious audio applications include Jack support by default. This makes it one of the best choices for a studio environment.
Outputs: PulseAudio, ALSA, ESD
We’re starting to get into the niche geology of Linux audio. Xine is a little like the chalk downs; it’s what’s left after many other audio layers have been washed away. Most users will recognise the name from the very capable DVD movie and media player that most distributions still bundle, despite its age, and this is the key to Xine’s longevity.
When Xine was created, the developers split it into a backend library to handle the media, and a front-end application for user interaction. It’s the library that’s persisted, thanks to its ability to play numerous containers, including AVI, Matroska and Ogg, and dozens of the formats they contain, such as AAC, Flac, MP3, Vorbis and WMA.
It does this by harnessing the powers of many other libraries. As a result, Xine can act as a catch-all framework for developers who want to offer the best range of file compatibility without worrying about the legality of proprietary codecs and patents.
Xine can talk to ALSA and PulseAudio for its output, and there are still many applications that can talk to Xine directly. The most popular are the Gxine front-end and Totem, but Xine is also the default back-end for KDE’s Phonon, so you can find it locked to everything from Amarok to Kaffeine.
Inputs: Qt and KDE applications
Outputs: GStreamer, Xine
Phonon was designed to make life easier for developers and users by removing some of the system’s increasing complexity. It started life as another level of audio abstraction for KDE 4 applications, but it was considered such a good idea that Qt developers made it their own, pulling it directly into the Qt framework that KDE itself is based on.
This had great advantages for developers of cross-platform applications. It made it possible to write a music player on Linux with Qt and simply recompile it for OS X and Windows without worrying about how the music would be played back, the capabilities of the sound hardware being used, or how the destination operating system would handle audio. This was all done automatically by Qt and Phonon, passing the audio to the CoreAudio API on OS X, for example, or DirectSound on Windows.
On the Linux platform (and unlike the original KDE version of Phonon), Qt’s Phonon passes the audio to GStreamer, mostly for its transparent codec support. Phonon support is being quietly dropped from the Qt framework.
There have been many criticisms of the system, the most common being that it’s too simplistic and offers nothing new, although it’s likely that KDE will hold on to the framework for the duration of the KDE 4 lifecycle.
The rest of the bunch
There are many other audio technologies, including ESD, SDL and PortAudio. ESD is the Enlightenment Sound Daemon, and for a long time it was the default sound server for the Gnome desktop. Eventually, Gnome was ported to use libcanberra (which itself talks to ALSA, GStreamer, OSS and PulseAudio) and ESD was dropped as a requirement in April 2009.
Then there’s Arts, the KDE equivalent of ESD, although it wasn’t as widely supported and seemed to cause more problems than it solved. Most people have now moved to KDE 4, so it’s no longer an issue.
SDL, on the other hand, is still thriving as the audio output component in the SDL library, which is used to create hundreds of cross-platform games. It supports plenty of features, and is both mature and stable.
PortAudio is another cross-platform audio library that adds SGI, Unix and Beos to the mix of possible destinations. The most notable application to use PortAudio is the Audacity audio editor, which may explain its sometimes unpredictable sound output and the quality of its Jack support.
And then there’s OSS, the Open Sound System. It hasn’t been a core Linux audio technology since version 2.4 of the kernel, but there’s just no shaking it. This is partly because so many older applications are dependent on it and, unlike ALSA, it works on systems other than Linux. There’s even a FreeBSD version.
It was a good system for 1992, but ALSA is nearly always recommended as a replacement. OSS defined how audio would work on Linux, and in particular, the way audio devices are accessed through the ioctl tree, as with /dev/dsp, for example.
ALSA features an OSS compatibility layer to enable older applications to stick to OSS without abandoning the current ALSA standard. The OSS project has experimented with open source and proprietary development, and is still being actively developed as a commercial endeavour by 4 Front Technologies. Build 2002 of OSS 4.2 was released in November 2009.